Environmental Testing
Water, wastewater, soil and environmental microbiology testing scoped by sample matrix, parameter, reference method, required reporting limit and intended use.
Testing Portfolios
Drinking / Source Water
Physicochemical and microbiological parameters selected against the water type and applicable specification, including BIS IS 10500 where relevant.
Wastewater & Effluent
Core physicochemical parameters, oxygen demand, solids, ions and selected contaminants for process monitoring or comparison with applicable discharge requirements.
Soil & Agricultural Samples
Soil pH, EC, organic carbon, available macro/micronutrients and selected contaminants, with interpretation tied to the method and sample purpose.
Environmental Microbiology
Microbial counts and indicator organisms in water or environmental samples using matrix-appropriate methods.
Surface / Air Microbiology
Project-defined microbiological environmental monitoring for laboratories, production or controlled work areas where the sampling plan is agreed.
Investigation & Trending
Defined sampling plans, repeat testing and result trending to support contamination investigations or process/environmental monitoring.
Representative Parameters
| Matrix / group | Representative parameters |
|---|---|
| Water — physical | Colour, odour, temperature, turbidity, conductivity, TDS and selected solids parameters. |
| Water — chemical | pH, alkalinity, acidity, hardness, chloride, sulphate, fluoride, nitrate/nitrite, phosphate and selected minerals. |
| Oxygen demand | Dissolved oxygen, BOD and COD where the method and sample preservation requirements are satisfied. |
| Metals / contaminants | Selected heavy metals and other chemical contaminants subject to method, instrumentation, reporting limit and matrix suitability. |
| Water microbiology | Total counts and indicator organisms such as coliforms / E. coli using the applicable method. |
| Soil fertility | pH, EC, organic carbon, nitrogen, phosphorus, potassium, sulphur and selected micronutrients such as Zn, Fe, Cu, Mn and B. |
| Environmental microbiology | Project-defined surface/air counts, yeast and mould, indicator organisms and contamination-investigation samples. |
Discuss an environmental testing requirement
Send the sample type, source, parameter list, purpose (routine QC, investigation, compliance or research), required standard and reporting limit if known.
Start an Enquiry